Our

Commercial and Residential Inspection Solutions

Have your property checked for mold or other contaminants with the help of Holt Analytical. Our agency is dedicated to producing honest and thorough inspection result reports and providing excellent customer service.

Pre and Post-Remediation Testing

An initial mold inspection is necessary to evaluate the extent of the remediation needed. Then, a clearance examination is performed after the rehabilitation process to measure its success. This post-restoration testing consists of the following:

After -Fire- Chemical Testing For Contaminants

The first step in remediating a fire damaged site is to send in qualified environmental consultants who can assess and delineate the extent of the damage as well as identify all contaminants present.

Restoring a fire damaged building to an inhabitable state involves assessing air quality, the presence of contaminants on building finishes and determining if anything was absorbed into porous surfaces as well as into building cavities which are not visible. Aside from the building, soil and any bodies of water will also need to be tested for contaminants which will need to be at acceptable levels before the site is deemed usable again. Remediation usually involves a combination of debris removal, cleaning, drying Holt Analytical is southern California based environmental consultants with the skills and experience necessary to assist local businesses and developers with all of their environmental compliance needs.

To learn more about our capabilities, please don’t hesitate to get in touch with us by calling 310.376.1283

Infrared Thermography for Water Intrusion Detection and More

This imaging technology utilizes cameras that detect heat radiation and produce photos. Since all objects emit infrared radiation based on their temperatures, it is possible to identify the presence of moisture in the dark using thermography.

Infrared thermography is one of the latest technological advances in the construction industry. It helps us understand what is inside your walls without causing damage. Using this device, we can diagnose potential moisture and insulation-related issues.

Mold Inspection

This visual examination of your property’s interior and exterior helps detect mold and mold-inducing conditions. It includes performing moisture readings on construction materials, such as:

Holt Analytical uses industry-specific state-of-the-art electronic equipment to detect excessive moisture in construction materials. This is because moisture may be the primary cause of indoor mold problems.

Mold Testing

Collecting samples for laboratory analysis helps specify the mold type present on surfaces and in the air. Identification and quantification produce invaluable data in determining the potential health risks and deciding the proper remediation solutions.

The Collection Process

Surface samples are taken directly from approximately one square inch of a surface. Meanwhile, air samples are a representation of mold spores in the environment. They are based on the actual number of spores captured in a canister called a spore trap.

In addition, obtaining samples for an EPA Relative Moldiness Index (ERMI) involves analyzing dust to capture the ERMI specimen.

Allergen Testing

Holt Analytical conducts allergen screenings by collecting samples of particles in a structure and performing a lab analysis. Then, we will provide an in-depth interpretation of the results about the presence of contaminants above acceptable limits.

Common Biological Contaminants

Mold is not the only biological contaminant that can be inhaled and cause adverse health reactions. Other indoor air pollutants include:

Mold Inspection Expert

Entrust your mold and environmental assessment needs to our experienced professionals. Reach out to us for some of the most exemplary inspection services in Southern California. We’d be happy to help you!